Nylon Type 6/6

PROPERTIES			UNITS	ASTM METHOD	0.2% WATER	2.5%
	Tensile Strength	-40°F 73°F 170°F	psi psi psi	0-638 D-638 0-638	— 12,600 8,500	16,100 11,200 5,900
	Yield Stress	-40°F 73°F 170°F	psi psi psi	D-638 D-638 D-638	— 12,600 8,500	16,100 8,600 —
	Elongation at Break	-40°F 73°F 170°F		D-638 0-638 D-638	— 90 155	35 300 350
	Shear Strength		psi	0-732	9,600	—
	Flexural Modulus	-40°F 73°F 170°F	psi psi psi	D-790 0-790 0-790	470,000 410,000 100,000	500,000 175,000 —
	Compressive Stress at 1% Def Deformation under Load (2000 psi,122°F) Deflection Temp.,	66 psi 264psi	psi % °F °F	D-695 D-621 D-648 D-648	4,900 1.4 470 220	— — — —
	Brittleness Temp. Izod Impact Strength	-40°F 73°F	°F ft.lb/in. ft.lb/in.	D-746 D-256 D-256	-148 — 1.3	-121 — 2.5
	Melting Point (Fisher-Johns) Melting Point (Crystalline) Coefficient of Linear Thermal Expan.		°F °F in./in./°F	D-789 D-696	482-500 518 —	— — —
	Specific Heat Thermal Conductivity		B.T.U./hr./ sq.ft./°F/in.	(5)	0.3-0.5 1.7	— —
	Volume Resistivity Dielectric Contant,	100Hz(cps) 10to3rdHz(cps) 10to6thHz(cps)	ohm-cm	D-257 D-150 D-150 D-150	10 to 15th 4.0 3.9 3.6	10 to 13th 6.0 5.1 4.1
	Power Factor	100Hz(cps) 10to3rdHz(cps) 10to6thHz(cps)		D-150 D-150 D-150	0.03 0.03 0.04	0.04 0.04 0.05
	Specified Gravity Hardness, Rockwell			D-792 D-785	1.13-1.15 R118,M79	— R108,M59
	Water Absorption (24 hr.) Water absorption (Saturation)		% %	D-570 D-570	1.5 8.5	— —
	Taber Abrasion, CS-17 Wheel, 1000g Flammability (Class)		mg./1000 Cycles	UL-95(9)	— —	3.5 94V-2

Nylon • Ohmoid Phenolics • Fibre • Delrin